Wood-finish-for-kitchen-table, arm-r-seal oil based topcoat is a tough, long-lasting wood finish that comes in a can with a pry-off lid. you can buy it in a variety of sizes, which can help reduce waste if you’re refinishing a very small or very large kitchen table. this finish is made with urethane resin, which means that it’s extremely durable.. Quick chart of best wood finish; best finish for wood kitchen table reviews #1. grizzly h2372 good stuff wood finish for maple tops #2. general finishes sgqt arm-r-seal urethane topcoat, semi-gloss, 1 quart, steps. 1. lightly hand-sand the wood, always working in the direction of the grain. 2. start sanding with 120-grit sandpaper and continue with progressively finer sandpaper up to 180 grit..

Question i'm refinishing a kitchen table in our shop (maple) and the customer wants a hard, durable finish on it (at *least* the top, if not the whole thing, legs and all)., ep 19: simple shellac and wax finish. mike demonstrates one of his favorite finishing methods, which allows him to fully finish the cabinet in one sitting.. Finishing a tabletop is tricky. on a big table especially, coating the entire surface before the finish becomes too sticky is the ultimate test of speed and skill. and your work has to be perfect. more than any other furniture surface, a tabletopreflects light and shows off every little flaw. but ..., however, if the table in question is made from light-colored wood, you can use water-based polyurethane, as it adds a crystal clear finish, rather than taking on a light amber tint. brush-on or spray-on polyurethane the wipe-on method is pretty self-explanatory, so let’s stick to the remaining two – brush-on and spray-on:.

Q: what’s the best finish to use to refinish a dining room table? i want something durable and food-safe. use oil-based polyurethane. varnish is not easy to apply, and shellac is not durable. tung oil dries slowly and needs many coats., sand the table top with a progression of sandpaper grits until the surface is smooth and scratch-free. if you have to make repairs with wood filler, do this before sanding to avoid having to come back and sand again, which can produce subtle but noticeable blemishes.